Bathroom Safety Tips

Bathroom Safety Tips

Home is generally a place for the people to relax, it’s considered as a safe place for all of us. However one of the most common places for fatal home accidents and incidents in our homes is in the bathrooms. Therefore bathroom safety should be a big concern for homeowners and their loved ones.

Homeowners can hurt themselves through fall, slips, and trips in the shower and bathtubs.

Generally, our modern bathroom are filled with impending hazards because of the existence of water that makes there surfaces prone to slippery and other related ceramics tabs found in them.

Who Is At Risk In The Bathroom

According to the research, women are at a greater risk for falls in the bathrooms. For senior citizens, falls in the bathroom are most common and head injuries from these falls make up 35%.

Because of these slips and trips in the bathroom and around the tabs the efforts to improve safety in these two areas needs a point of focus. Then all bathroom toilet mats, rugs, and runners should have non-skid bathroom mat property as a safety feature in the material.

It’s recommended to lift all rugs mats and runner occasionally and check to see if they need to be replaced.

More safety features in our bathrooms need to be observed have listed the following guidelines to help homeowners and their loved ones to stay safe in bathroom related issue have not exhausted them but these are just basics.

14 Best Simple Steps to Avoid Slips, Trip and Falls in the bathroom

Due to the nature of the bathroom surface hardness that makes it’s dangerous if a trip, fall or slip occurs especially to the senior citizens and the young ones. These places can become very slippery when wet and soapy. Doing some, modification in the bathrooms can reduce these risks.

  1. Use of a bathtub sidewall cushion to aid softening the hard edge and providing a non-slip surface also its recommended to have some bathroom safety handles to reduce the risk of these falls.
  2. Purchase a showerhead that allows one to remove it from the mount simply handheld showerhead.
  3. Installation of a wall mounted seat or waterproof bath seat in the bathroom if you have and a family member with difficult prolonged standing in the shower.
  4. Purchase a bath chair or bench to eliminate climbing in and out of the tub and an anti-slippery material at the stepping edge of the bathtub.
  5. Most bathrooms have toilets so its advised for senior citizens because they have difficulty in getting on and off the toilet, to use an elevated toilet or a higher toilet with side rails to help standing up.
  6. Install grab bars to hold onto when getting into and out of the bathtub or shower or off the toilet.
  7. Allowing water to empty completely out of bathtubs/shower before exiting.
  8. Use non-slip rugs and mats to catch drips while bathing
  9. All electrical appliances, such as shavers and hair dryers should be stored away from wet sections of the bathroom like the sink.
  10. Always wear non-slip footwear in the bathroom
  11. Avoid use of bath oils in the bathroom and near bathtubs
  12. Keep soap and shampoo within reach for everybody using the bathroom
  13. Use shower curtain liners made from the heavy plastic material.
  14. Use a non-slip mat or adhesive safety strips inside the bathtub and showers.

Best Bathroom Safety Handles.

How to Choose the Best Shower Grab Bars.

Choose size

The first step is to pick the perfect size and handicap grab bar height. Shower grab bars come in different lengths, from 12 inches to 48, so you will easily find the ideal one for your bathroom.

In addition, you should think about the diameter. If someone in your family suffers from arthritis or simply has weak arms, you probably want to buy a grab bar with a small diameter.

Evaluating the size of your bathroom/shower and your needs
Another step  is to determine where you need to place a grab bar. In other words, just sit on a toilet (with your clothes on of course) and try to get up, in order to find out if you need to install toilet handicap bars.

Similarly, step into the shower and see whether or not you will need additional balance and support when in the shower.

Material and color

Another factor is the material, bathtub safety bar can be made of nylon, stainless steel, plastic, etc. Of course, stainless steel grab bars are most durable and are very secure. However, you can opt for any type, as long as it comes with a brushed or textured coating/finish, to provide you with a better grip.

As for the color, it’s best to choose the one that is different from the wall and tiles color, so that you and your family can notice it more easily.

If you want to deal with grab bar installation all by yourself, here are the steps to help you with that. Clearly,

How To Installation Bathroom Grab Bar.

What tools are you going to need?

The installation of grab bars isn’t hard, when you know what you are doing (obviously) and with the right tools. So, you will need a level, a hammer, a drill and drill bits silicon for sealing the gaps.

Where will you mount the grab bar?

First, you need to determine where you will mount the grab bar. Locate two studs that are spaced about 16 inches. Then, mark the location where the screws should go. You can use a masking type for marking, in order to prevent the drill bit from scratching the tile.

Drill holes

The next step is to drill holes with the right drill bits they should not be too big nether too small. We recommend the use of wall anchors, as these provide better traction and are much more secure. Just make sure that the screws enter the studs for minimum 1 inch.

Secure the grab bar

Put a small amount of silicone around the seam so as to prevent the water from leaking into the holes you’ve just drilled. This will help in preventing the rusting of the screws and help maintain the bar firm and last loner

7 Best Simple Guide to Protecting Burns in the Bathroom

  1. Most of the burns in the bathroom can be prevented easily if the water is set to a safe operating temperatures.
  2. By installing temperature limiters, pressure balance or anti-scald. With the water temperature limiter, thy quickly reduces the water flow to a trickle when hot water reaches unsafe temperatures. It can be placed in existing tub spout, hand shower or showerheads to reduce burn injuries.
  3. Testing the bathwater before getting into it, either by placing your whole hand in the water and moving around the tub to check hot spots.
  4. Turning the cold water first and then mixing in warmer water until it is safe for use.
  5. Lowering the temperatures of hot water or by using a thermostat to regulate the temperatures, this can also help reduce burns in the bathroom.
  6. The suggested sitting being 120 o F or medium setting.
  7. Knowing how hot your bath water is the most important and best approach to avoid burns. Test the temperature with an immersion or candy thermometer.

Add a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Facebook
Facebook
LinkedIn
Follow by Email